Closed Mould Equipment
Patriot™ Innovator Injection Systems
The Patriot Innovator Injection Systems were designed for injecting polyester, vinylester and methacrylate resins and catalyst at controlled pressures. The material mixing is done on demand at the injection head, and the catalyst ratio can be adjusted from 0.75% to 2.5%.The fully pneumatic automated controls, controlling the number of strokes during injections, recirculation, and more makes the process easier and more efficient.
Patriot™ Innovator Pro Injection System
Output Capabilities:
Up to 7.5 lbs/min. (3.4 kgs/min.)
(Depending on materials and application.)
Avg. Air Consumption: 10 CFM
Catalyst % Range: .75% - 2.5% by volume
Available Pump Ratio: 7:1
Maximum Air Input Pressure: 100 psi (7bar)
Patriot™ Innovator Innovator Plus PLC System
Output Capabilities:
Up to 7.5 lbs/min. (3.4 kgs/min.)
(Depending on materials and application.)
Avg. Air Consumption: 10 CFM/150 ltrs
Catalyst % Range: .75% - 2.5% by volume
Available Pump Ratio: 7:1
Maximum Air Input Pressure: 100 psi (7bar)
Patriot™ Innovator Injection Systems
Resin Transfer Moulding (RTM) is a common closed mould production method in the composites industry. There are many benefits to closed moulding including reduced emissions, higher quality parts, cleaner facilities, and more efficient work environments. Our RTM systems provide reliable meter and mixing pumping equipment for closed moulding, including its accessories and seals. Our equipment enables you to inject into disposable bags, LRTM moulds, and many reusable bag methods without over pressurising the mould/part.
